VAG 3.0L V6 TDI to Nissan 3.0/3.3L Transmission Adapter Kit
- Description
- KIT CONTENTS
- VW ENGINE CHART
This adapter plate kit allows you to attach a Nissan 3.0L (VG30 series engines) or 3.3L (VG33) transmission with a VW/Audi/Porsche 3.0L V6 TDI Engine. The most commonly used engine is the CATA and CNRB. Other 3.0L V6 TDI Engines will not currently work because the starter does not bolt to the Timing Cover.
This adapter kit requires you to use a VG30E or VG30ET 6 bolt flywheel.
There are numerous clutch/pressure plate combinations from various Nissan generations (Z31, Z32, Z33, etc..) that work with the Z31 flywheel.
If you are using a VG30DE, VG30DET, VG30DETT transmission you need to use the VG30E or VG30DET 6 bolt flywheel.
PRODUCT FEATURES
Our kit has numerous features that set us apart from the competition.
PREMIUM BILLET ALLUMINUM ADAPTER PLATES. We do not skimp on quality, and only use high quality 6061 Aluminum billets. Our tempered 6061 is far superior to the cheap cast non-tempered aluminum adapter plates typically seen with cheaper adapter kits. Our billets undergo a tempering process of heat treating and artificial aging to achieve the perfect strength and toughness for our application.
EXTRA FIRE WALL CLEARANCE. Our 2.3 inch thick adapter moves the M57 engine forward 2.3 inches from the transmission bellhousing. The transmission remains in the original position, keeping the shifter in the factory position for most vehicle conversions.
HIGH PERFORMANCE CRANK ADAPTER: Our high-performance crank adapters are manufactured from high-strength alloy steel and designed to handle demanding applications. Rated at 800 ft-lbs of torque, these adapters are engineered to deliver the strength and reliability your drivetrain needs.
Crank adapters are subjected to significant stress and repeated load cycles, making material selection and design critical to long-term durability. Unlike aluminum or mild steel alternatives, our alloy steel crank adapters are built with performance and reliability in mind.
We believe your crank adapter should never be the weak link in your drivetrain.
MAINTAINS STOCK STARTER. Our kit maintains the stock starter and flex plate from the 3.0L V6 TDI.
(2) Adapter plates: Billet 6061-T6 Aluminum, 1.9" Thick
(2) Crank adapters: Alloy steel for high performance applications (800ft-lbs torque). Pilot bushing pre-installed for manual kit.
Installation hardware for bellhousing, crank adapter, and starter are included. No flywheel/flexplate bolts are included. You need to use OEM equivalent flywheel bolts.
OEM flywheel bolt size: 6 bolts, M10 x 1.0, length approx. 25.4mm
This kit was specifically designed to replace the Nissan 3.0L (VG30E, VG30ET, VG30DE, VG30DET, VG30DETT) or 3.3L (VG33) engine. This kit makes the back of the VAG 3.0L TDI engine look like the engine block it is replacing. This means you can bolt any Nissan 3.0L or 3.3L (VG33) transmission to any VW TDI engine using this adapter kit.
This adapter kit requires you to use a VG30E or VG30ET 6 bolt flywheel.
There are numerous clutch/pressure plate combinations from various Nissan generations (Z31, Z32, Z33, etc..) that work with the Z31 flywheel.
If you plan to use a VG30DE, VG30DET, VG30DETT transmission see the notes below.
Compatible Engine codes:
Z31 engines: VG30E, VG30ET
Z32 engines: VG30DE, VG30DET, VG30DETT (need to use VG30/VG33 6 bolt flywheel)
- VG33E
- VG33ER (supercharged)
***VG33 and VG30 share the same engine block bellhousing/crank hub bolt pattern***
Compatible Transmissions:
-Z31 transmissions
-Z32 transmissions with 6 bolt z31 flywheel
If you plan to use a Z32 or similar transmission from a VG30DE, VG30DET, VG30DETT (8 bolt flywheel), you need to use the VG30E or VG30ET 6 bolt flywheel (240mm or 250mm). Use a throw-out bearing that is compatible with the transmission you choose.
Flywheel 6 bolt (250mm):
***240mm and 250mm refers to the clutch surface diameter, both flywheels have the same ring gear diameter***
NISSAN 300ZX TURBO (1987 - 1989)
NISSAN D21 PICKUP V6 (1988 - 1994)
NISSAN FRONTIER V6 (1999 - 2004)
NISSAN PATHFINDER (1987 - 2000)
NISSAN PICKUP V6 (1995 - 1996)
NISSAN XTERRA V6 (2000 - 2004)
Flywheel 6 bolt (240mm):
NISSAN 300ZX N/A (1987 - 1989)
Clutch/Pressure Plate Options:
-Z31, Z32, Z33
-350z, G35, Nissan 240sx, RB20DET, etc..
***Make sure to do your own research when selecting Clutch kits***
***If your vehicle is not on this list, please cross reference and perform your own research. Other similar vehicle models may also be compatible. ***
Our Adapter Kit is only Compatible with the 3.0L V6 TDI found in the Volkswagen Touareg, Audi Q7 and Porsche Cayenne. These Engines have the Starter that bolts to the timing cover.
Check out the chart below for all compatible VW engines.
Note: Our kits are specifically tested on a CATA Engine.
| VOLKSWAGEN 3.0L V6 DIESEL ENGINES (NORTH AMERICA) | |||||
| Engine Name | Engine Code | Year | Model | HP/TQ | Notes |
| 3.0L TDI | CATA | 2009-2012 | Touareg | 225/405 | Common Rail |
| 3.0L TDI | CATA | 2009-2012 | Audi Q7 | 225/405 | Common Rail |
| 3.0L TDI | CNRB | 2013-2016 | Touareg | 240/406 | Common Rail |
| 3.0L TDI | CNRB | 2013-2015 | Audi Q7 | 240/406 | Common Rail |
| 3.0L TDI | CNRB | 2013-2016 | Porsche Cayenne | 240/406 | Common Rail |
