Menu

GM/CHEVY - Adapter for TDI Engines

Enter your custom Javascript or HTML content here

TDC 203 CHevy SMALL BLOCK Pre 1987 Adapter Kit

alt

This adapter allows the installation of the VW TDI engine to a Chevy small block V8 / V6 transmission. It uses the stock GM 153 tooth pre 1986 flywheel (two piece rear main seal) and includes a high torque mini starter.

Confirm your transmission bellhousing pattern here: chevy-small-block-part2

Confirm your flywheel bolt pattern here: chev-small-v8-pre-87-hub

ALL TDI Adapters are $1,125 USD and include the mini high torque starter

 

BUY NOW

 

 

TDC 204 CHEVY SMALL Block Post 1987 Adapter kit

alt

This adapter allows the installation of the VW TDI engine to a Chevy small block V8 / V6 transmission. It uses the stock GM 153 tooth pre 1986 flywheel (two piece rear main seal) and includes a high torque mini starter.

Confirm your transmission bellhousing pattern here: chevy-small-block-part2

Confirm your flywheel bolt pattern here: chev-small-v8-pre-87-hub

ALL TDI Adapters are $1,125 USD and include the mini high torque starter

 

BUY NOW

The adapters are not transmission specific, they make the back of the TDI "look" like the back of the engine that the TDI is replacing.

The adapters can be used with automatic or standard transmissions. 2WD or 4WD.

Enter your custom Javascript or HTML content here

Chevy Flywheels

Our Chevy flywheels are manufacture from high quality billet steel. This High Inertia billet steel flywheel helps the engine maintain RPM's in rough terrain.

These flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation and are SFI-certified, so you know that you can count on them.

 

TDC 606 CHEVY SMALL BLOCK FLYWHEEL

Weighs in at 42lbs

$360 USD

BUY NOW

Enter your custom Javascript or HTML content here

Accessories to help with your TDI swap

768;550;c3fed5d8cb93cf8255272b0a4648bc2f0ac7a8b2768;550;ffb7351e3ec73b4c094d556b3557bffe0f493636

TDC 200 Oil Filter Relocation Plate

This billet aluminum housing has provisions for main oil out and return (ORB-6 threads) as well as turbo line in the stock location along with oil pressure sender and a second oil pressure hole for accessory use.

Fits VW TDI model BEW, BHW and ALH engines and possibly other VW engines.

$165.00 USD

BUY NOW

TDC 403 WATER OUTLET

This 1.9L TDI water outlet fitting in the same depth as the tandem pump and just has the rad, heater and temp sender outlets.

Very compact when fighting firewall clearance in a TDI conversion.

$38.00 USD

BUY NOW

768;550;23374ce450cd9f854d1bdf8f727a3e7f09a568a6768;550;c24427d7b4b3b2114a2d751ad596bc2708f063c7768;550;1c60735476445885d64a2dacb533183e3c543a6c

TDC 207 UNIVERSAL ENGINE MOUNT KIT

This kit includes both left and right engine mount parts.

Just weld them up at the angle you need.

It has the correct spacing to align with holes in the ALH and newer 1.9L and 2L TDI . These are the same parts that we use to build our custom mounts.

$95.00 USD

BUY NOW

768;550;cf45ec2043b93e9464f33cd39dda31f06dbe63a0768;550;d039aacef1fac659505040091c5765b718e5bf1d

TDC 209 BEW ACCESSORY RELOCATION KIT

Accessory drive relocation plate with idler, belt and hardware.

This kit allows the accessory drive bracket on BEW engines to be moved up 6" for added clearance on the A/C compressor and Power Steering pump.

It puts the top of alternator slightly below the top of the intake manifold.

Some modification of the stock accessory bracket is required.

Only works with BEW code engines, not ALH.

$340.00 USD

BUY NOW

TDC 216 UNIVERSAL FRAME MOUNTS

This kit includes the parts to build the frame side of your custom mounts.

It includes the 1/2" steel plates with 1/4" steel gussets. From the frame side to the outer edge is 4" and they are about 3.5" wide.

Also included are the rubber mounts and hardware.

$120.00 USD

BUY NOW

Any Questions?

Contact Us today!